Any ideas, or should I cut my loses and send everything back and try another vendor. OK, that's my story and I am sticking to it. Using this program, you may discover what is limiting your system performance in each occasion. It currently supports 43 kinds of information including CPU, Memory, Network, and detailed HDD usages. Going to purchase a thermal couple to get some actual readings. Moo0 System Monitor lets you keep your eye on system resource usages of your PC. > The exit air is 'warm-to-hot' but not the 195F noted when these boxes are under stress. > Also, fans and air flow path was inspected and does not appear to be any obstruction. > Again, we are using three system board monitoring programs and all there are reporting matching readings. The HDD temperatures ended up being a little higher than normal, 100-120F.īefore pulling the plug and sending all four of these PCs back to the vendor, i thought I would reach out to E-E and see if I missed something or if there is a thermal driver/system monitor patch that may be missing. In checking these, the CPU temperatures are still high, 10F less from the previous two, but none the less still very uncomfortably high. I have seen this sort of behavior before when a PC's CPU chip was removed and not enough thermal paste (Or the wrong kind) was applied and another time when the CPU was over-clocked - but checking with the vendor, none of these were done.īased on the possible 'short life' of these PCs, we requested replacement units, which we arrived last Monday. When we compare these temperatures measurements to the previous three PCs, the temperature ranges a normal: > In an idle state the HDDs (Our highest concern due to possible data loss_ are running at 125-145F and under stress will reach as high as 176F. > In an idle state the CPUs are running at 150-170F and under stress will reach as high as 190F. We use a System Monitor tool called Moo0 and a few others to monitor the CPU and HDD temperatures - We have been using these tools for the past 7 years and found them to be very reliable. Three weeks ago we purchased two more of the Dell Optiplex 980 and started our testing in preparation for the integration into our production environment.ĭuring our 'stress testing' it became apparent that these two 980's were running extremely hot: I found a good source in a vendor/seller (Amazon partner) and with the first three PCs, life was great and the integration went off without a hitch. We are upgrading several of our Workstations to the Dell Optiplex 9xx series with the Intel I7 CPUs - Due to budgeting, we are force to use 'resale' units.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |